Lindnerhof Multi-Pouch Slim PA109/II
€57.95*
Multi-Pouch slim PA109/II
The improved and even more lightweight Generation 2 of the PA109/II Multi-Pouch slim is a real multitalent - you can also use it to carry radios or drinking bottles of up to one litre (e.g. Nalgene).
The new features of the 2nd generation at a glance
Slimmer straps, 20mm instead of 25mm
Larger opening for easier access
Backside made from MX
Webbing on the front matches the camouflage pattern in Multicam®, 3fb Flecktarn, and 5fb Flecktarn
Additional equipment storage and organisation
The Lindnerhof Multi-Pouch slim PA109/II is perfect for stowing a wide range of equipment. Thanks to the loop surfaces on the inside, you can also organize the contents of the pouch- just grab one of our panels (e.g. MX374, MX375, LT522) and everything will find its place.
On the outside, the PA109/II has a total of 4 additional loops for attaching your gear - one on each side and two on the bottom.
Multi-pouch, hydration system or radio pouch?
The PA109/II is not only a multi-pouch, it can also be used to carry radios or drinking bottles of up to one litre (e.g. Nalgene). There is a covered outlet at the top of the pouch through which you can pass either your drinking tube or the cable from your radio. This means that the PA109/II can also be used as a hydration system or as a closed radio pouch.
Zip-zip-hooray!
The reverse zipper on the PA109/II prevent dirt from entering the pouch and ensures that the zip works reliably. The quick-opening lace at the top also allows the pouch to be opened in a flash with a single pull.
Attachment via PALS strap or on the belt
On the back, the PA109/II features slim 20mm PALS straps that can be attached to all common MOLLE/PALS systems. These slimmer straps not only make it easier to mount on reinforced systems like our Curv belts, but also reduce the weight of the pouch. The back is made of MX material to further lighten your magazine pouch. Alternatively, you can pass a trouser or waist belt up to 50mm wide through the back of the PA109/II.
Additional MOLLE/PALS rows
On the front of the pouch, there are also 20mm MOLLE/PALS rows for attaching additional pouches. In the colors Multicam®, 3fb Flecktarn, and 5fb Flecktarn, the webbing on the front matches the camouflage pattern.
Product Details:
Made of durable Cordura®, with MX backside
Attachment with 20mm PALS straps or by looping through the belt (50mm)
Standard MOLLE/PALS webbing (20mm) on the entire front
Covered outlet at the top of the pouch for drinking tube or cables
Webbing in matching camouflage pattern for Multicam®, 3fb Flecktarn, and 5fb Flecktarn
Loop areas on the insides to add panels for organisation
Quick-opening lace at the top
Reverse zippers to prevent dirt from getting inside
Four loops (two on the bottom and two on the sides) for attaching additional gear
Size: 130mm x 230mm x 40mm
Colors:
Black
Coyote
Stonegrey
5fb Flecktarn
3fb Flecktarn
Multicam®
Lindnerhof Multi-Pouch Vertical Large PA022
€69.95*
Multi-Pouch vertical large PA022
The PA022 Multi-Pouch vertical large is a real space wonder - perfect for large items of equipment, a 1l hydration bladder or electronic devices.
Additional equipment storage and organisation
The Lindnerhof Multi-Pouch vertical large PA022 is perfect for stowing a wide range of equipment. Thanks to the loop surfaces on the inside, you can also organize the contents of the pouch - just grab one of our panels (e.g. MX374, MX375, LT522) and everything will find its place.
On the outside, the PA022 has a total of 4 additional loops for attaching your gear - one on each side and two on the bottom.
Multifunctional use
The PA022 is not just a multi-pouch, it can also hold a hydration bladder of up to one litre (e.g. Source) as well as various electronic devices. At the top of the pouch there is a covered outlet through which you can feed either your hydration tube or the cables of your device.
Zip-zip-hooray!
The reverse zipper on the PA022 prevent dirt from entering the pouch and ensures that the zip works reliably. The quick-opening lace at the top also allows the pouch to be opened in a flash with a single pull.
Attachment via PALS strap or on the belt
On the back, the PA022 features slim 20mm PALS straps that can be attached to all common MOLLE/PALS systems. These slimmer straps not only make it easier to mount on reinforced systems like our Curv belts, but also reduce the weight of the pouch. The back is made of MX material to further lighten your magazine pouch. Alternatively, you can pass a trouser or waist belt up to 50mm wide through the back of the PA022.
Additional MOLLE/PALS rows
On the front of the pouch, there are also 20mm MOLLE/PALS rows for attaching additional pouches. In the colors Multicam®, 3fb Flecktarn, and 5fb Flecktarn, the webbing on the front matches the camouflage pattern.
Product Details:
Made of durable Cordura®, with MX backside
Attachment with 20mm PALS straps or by looping through the belt (50mm)
Standard MOLLE/PALS webbing (20mm) on the entire front
Covered outlet at the top of the pouch for drinking tube or cables
Webbing in matching camouflage pattern for Multicam®, 3fb Flecktarn, and 5fb Flecktarn
Loop areas on the insides to add panels for organisation
Quick-opening lace at the top
Reverse zippers to prevent dirt from getting inside
Four loops (two on the bottom and two on the sides) for attaching additional gear
Size: 200mm x 260mm x 40mm
Colors:
Black
Coyote
Stonegrey
5fb Flecktarn
3fb Flecktarn
Multicam®
Lindnerhof Multi-Pouch Horizontal PA054/II
€49.95*
Multi-Pouch vertical PA054/II
The improved Generation 2 of the PA054/II Multi-Pouch vertical is now even more lightweight while maintaining the durability of proven materials.
The new features of the 2nd generation at a glance
Slimmer straps, 20mm instead of 25mm
Larger opening for easier access
Backside made from MX
Webbing on the front matches the camouflage pattern in Multicam®, 3fb Flecktarn, and 5fb Flecktarn
Additional equipment storage and organisation
The Lindnerhof Multi-Pouch vertical PA054/II is perfect for stowing a wide range of equipment. Thanks to the loop surfaces on the inside, you can also organize the contents of the pouch - just grab one of our panels (e.g. MX374, MX375, LT522) and everything will find its place.
On the outside, the PA054/II has a total of 4 additional loops for attaching your gear - one on each side and two on the bottom.
Zip-zip-hooray!
The reverse zipper on the PA054/II prevent dirt from entering the pouch and ensures that the zip works reliably. The quick-opening lace at the top also allows the pouch to be opened in a flash with a single pull.
Attachment via PALS strap or on the belt
On the back, the PA054/II features slim 20mm PALS straps that can be attached to all common MOLLE/PALS systems. These slimmer straps not only make it easier to mount on reinforced systems like our Curv belts, but also reduce the weight of the pouch. The back is made of MX material to further lighten your magazine pouch. Alternatively, you can pass a trouser or waist belt up to 50mm wide through the back of the PA054/II.
Additional MOLLE/PALS rows
On the front of the pouch, there are also 20mm MOLLE/PALS rows for attaching additional pouches. In the colors Multicam®, 3fb Flecktarn, and 5fb Flecktarn, the webbing on the front matches the camouflage pattern.
Product Details:
Made of durable Cordura®, with MX backside
Attachment with 20mm PALS straps or by looping through the belt (50mm)
Standard MOLLE/PALS webbing (20mm) on the entire front
Webbing in matching camouflage pattern for Multicam®, 3fb Flecktarn, and 5fb Flecktarn
Loop areas on the insides to add panels for organisation
Quick-opening lace at the top
Reverse zippers to prevent dirt from getting inside
Four loops (two on the bottom and two on the sides) for attaching additional gear
Size: 130mm x 180mm x 40mm
Colors:
Black
Coyote
Stonegrey
5fb Flecktarn
3fb Flecktarn
Multicam®
Lindnerhof Multi-Pouch Horizontal Large PA023
€59.95*
Multi-Pouch horizontal large PA023
The PA023 Multi-Pouch horizontal large is a real space wonder - perfect for large items of equipment.
Additional equipment storage and organisation
The Lindnerhof Multi-Pouch horizontal large PA023 is perfect for stowing a wide range of equipment. Thanks to the loop surfaces on the inside, you can also organize the contents of the pouch - just grab one of our panels (e.g. MX374, MX375, LT522) and everything will find its place.
On the outside, the PA023 has a total of 4 additional loops for attaching your gear - one on each side and two on the bottom.
Zip-zip-hooray!
The reverse zipper on the PA023 prevent dirt from entering the pouch and ensures that the zip works reliably. The quick-opening lace at the top also allows the pouch to be opened in a flash with a single pull.
Attachment via PALS strap or on the belt
On the back, the PA023 features slim 20mm PALS straps that can be attached to all common MOLLE/PALS systems. These slimmer straps not only make it easier to mount on reinforced systems like our Curv belts, but also reduce the weight of the pouch. The back is made of MX material to further lighten your magazine pouch. Alternatively, you can pass a trouser or waist belt up to 50mm wide through the back of the PA023.
Additional MOLLE/PALS rows
On the front of the pouch, there are also 20mm MOLLE/PALS rows for attaching additional pouches. In the colors Multicam®, 3fb Flecktarn, and 5fb Flecktarn, the webbing on the front matches the camouflage pattern.
Product Details:
Made of durable Cordura®, with MX backside
Attachment with 20mm PALS straps or by looping through the belt (50mm)
Standard MOLLE/PALS webbing (20mm) on the entire front
Webbing in matching camouflage pattern for Multicam®, 3fb Flecktarn, and 5fb Flecktarn
Loop areas on the insides to add panels for organisation
Quick-opening lace at the top
Reverse zippers to prevent dirt from getting inside
Four loops (two on the bottom and two on the sides) for attaching additional gear
Size: 250mm x 140mm x 50mm
Colors:
Black
Coyote
Stonegrey
5fb Flecktarn
3fb Flecktarn
Multicam®
Lindnerhof Multi-Pouch Horizontal PA053/II
€49.95*
Multi-Pouch horizontal PA053/II
The improved Generation 2 of the PA053/II Multi-Pouch horizontal is now even more lightweight while maintaining the durability of proven materials.
The new features of the 2nd generation at a glance
20mm webbing instead of 25mm for even lighter weight
Larger opening for easier access
Backside made from MX
Webbing on the front matches the camouflage pattern in Multicam®, 3fb Flecktarn, and 5fb Flecktarn
Additional equipment storage and organisation
The Lindnerhof Multi-Pouch horizontal PA053/II is perfect for stowing a wide range of equipment. Thanks to the loop surfaces on the inside, you can also organize the contents of the pouch - just grab one of our panels (e.g. MX374, MX375, LT522) and everything will find its place.
On the outside, the PA053/II has a total of 4 additional loops for attaching your gear - one on each side and two on the bottom.
Zip-zip-hooray!
The reverse zipper on the PA053/II prevent dirt from entering the pouch and ensures that the zip works reliably. The quick-opening lace at the top also allows the pouch to be opened in a flash with a single pull.
Attachment via PALS strap or on the belt
On the back, the PA053/II features slim 20mm PALS straps that can be attached to all common MOLLE/PALS systems. These slimmer straps not only make it easier to mount on reinforced systems like our Curv belts, but also reduce the weight of the pouch. The back is made of MX material to further lighten your magazine pouch. Alternatively, you can pass a trouser or waist belt up to 50mm wide through the back of the PA053/II.
Additional MOLLE/PALS rows
On the front of the pouch, there are also 20mm MOLLE/PALS rows for attaching additional pouches. In the colors Multicam®, 3fb Flecktarn, and 5fb Flecktarn, the webbing on the front matches the camouflage pattern.
Product Details:
Made of durable Cordura®, with MX backside
Attachment with 20mm PALS straps or by looping through the belt (50mm)
Standard MOLLE/PALS webbing (20mm) on the entire front
Webbing in matching camouflage pattern for Multicam®, 3fb Flecktarn, and 5fb Flecktarn
Loop areas on the insides to add panels for organisation
Quick-opening lace at the top
Reverse zippers to prevent dirt from getting inside
Four loops (two on the bottom and two on the sides) for attaching additional gear
Size: 190mm x 140mm x 40mm
Colors:
Black
Coyote
Stonegrey
5fb Flecktarn
3fb Flecktarn
Multicam®
Lindnerhof Multi Hanger Pouch small LT373
€49.95*
Multi Hanger Pouch small LT373
The LT373 Multi Hanger Pouch small can be easily attached to a plate carrier or chest rig via hook and loop to give you extra storage space. Its features allow it not only to be used as a classic multi-pouch, but also to be converted into a medical pouch.
Additional equipment storage and organisation
The Lindnerhof Multi Hanger Pouch small LT373 is perfect for stowing a wide range of equipment. Thanks to the loop surfaces on the inside, you can also organize the contents of the pouch- just grab one of our panels (e.g. MX374, MX375, LT522) and everything will find its place.
There is an adjustable shock cord on the bottom of the pouch for attaching additional equipment, such as a tourniquet. For even more secure and compact storage, the shock cord can also be unthreaded and cross-looped. For this purpose, the LT373 has a total of 6 loops on the underside - three at the front and three at the back.
Zip-zip-hooray!
The reverse zipper on the LT373 prevent dirt from entering the pouch and ensures that the zip works reliably. The quick-opening lace at the top also allows the pouch to be opened in a flash with a single pull. The zip extends all the way to the edges of the bottom of the pouch, allowing it to be opened completely and spread out flat. This gives you the best possible access to your equipment.
Attachment via hook and loop
The LT373 consists of two components that are connected by a buckle: the hook and loop flap and the pouch itself.
The flap gets attached to your plate carrier or micro rig via hook and loop and remains there. The pouch itself hangs underneath and can be removed in a flash if required.
Product Details:
Made of durable Cordura®
Perfect for use as a medical pouch
Attachment via hook and loop
Loop areas on the insides to add panels for organisation
Quick-opening lace at the top
Reverse zippers to prevent dirt from getting inside
Extended zip to open and unfold the pouch completely
Shock cord at the bottom for attaching additional gear, such as a tourniquet
Size: 190mm x 90mm x 80mm
Colors:
Black
Coyote
Stonegrey
5fb Flecktarn
3fb Flecktarn
Multicam®
Lindnerhof Multi-Pouch Vertical MX054
€54.95*
Multi-Pouch Vertical MX054
Not only for multipurpose use, but also for multimodular attachment
Lindnerhof’s new multipurpose pouches are made from the recently developed MX multiaxial laminate material. They offer a lightweight solution for adding space to organise and stow your extra gear. Full Velcro® fastener strips inside let you add various other Lindnerhof panels.
The pouches come with four outside attachment points so you can affix tourniquets and lights and/or compress the pouch if needed. The pouch is attachable anywhere with classic MOLLE/Pals. These new Lindnerhof pouches also permit looping the pouch onto your belt by means of special slots on the back. Carry them as you want—and there is even a horizontal version available, the Multi-Pouch Horizontal MX053.
Zip or pull it for quick access
These new multipurpose pouches come with slim reversed two-way zippers and a pair of pullers.This features enables you to open the pouch in either direction by zipper. If you need to open the pouch faster, just pull the small drawstring found in the top middle. Because the zippers are reversed, less dirt will find its way into the pouches.
Features:
Multi-Purpose Pouch
MX material
Lightweight and robust
Built for reliability
Velcro® outer surface for patches
Four attachment points to tie down gear/equipment
Tourniquet
Lightsticks
Modular attachment
MOLLE/PALS on the back
Belt attachments available
Modular internal organisation
Velcro® area in front and back for attaching panels (not included), for sorting e.g.
Fast opening
Top-centre drawstring for rapid zipping
Slim reversed zippers - Let less dirt get inside
Colour options:
Black
Coyote
Stone Grey
5fb Flecktarn
MultiCam®
Lindnerhof Multi-Pouch Horizontal MX053
€54.95*
Multi-Pouch Horizontal MX053
Not only for multipurpose use, but also for multimodular attachment
Lindnerhof’s new multipurpose pouches are made from the recently developed MX multiaxial laminate material. They offer a lightweight solution for adding space to organise and stow your extra gear. Full Velcro® fastener strips inside let you add various other Lindnerhof panels. The pouches come with four outside attachment points so you can affix tourniquets and lights and/or compress the pouch if needed.
The pouch is attachable anywhere with classic MOLLE/PALS. These new Lindnerhof pouches also permit looping the pouch onto your belt by means of special slots on the back. Carry them as you want—and there is even a vertical version available, the Multi-Pouch Vertical MX054.
Zip or pull it for quick access
These new multipurpose pouches come with slim reversed two-way zippers and a pair of pullers. This features enables you to open the pouch in either direction by zipper. If you need to open the pouch faster, just pull the small drawstring found in the top-middle. Because the zippers are reversed, less dirt will find its way into the pouches.
Features:
Multi-Purpose Pouch
MX material
Lightweight and robust
Built for reliability
Velcro® outer surface for patches
Four attachment points to tie down gear/equipment
Tourniquet
Lightsticks
Modular attachment
MOLLE/PALS on the back
Belt attachments available
Modular internal organisation
Velcro® area in front and back for attaching panels (not included), for sorting.
Fast opening
Top-centre drawstring for rapid zipping
Slim reversed zippers
Letsless dirt get inside
Colour options:
Black
Coyote
Stone Grey
5fb Flecktarn
MultiCam®
Lindnerhof Multi Hanger Pouch MX174
€54.95*
Multi Hanger Pouch MX174
Space-saving outer presentation
Multi Hanger Pouch MX174 is conceived as a classic zipper pouch made from Lindnerhof´s new MX multiaxial laminate material. It allows you to stow additional needed gear on your carrier. A big benefit of the pouch is it’s space-saving Velcro® fastened flap for attachingit to your carrier.
So whether under the front or back of your Lindnerhof plate carrier, this feature will prevent your set-up from becoming bulky while efficiently leaving you room for ammunition, medic supplies, or radio bags.
Space magic inside
The inside of the pouch is designed for maximum modularity to let you adapt panels (like the Lindnerhof LT128 panel set). The entire inside of the pouch is lined with Velcro® to make organising your stuff super-easy. By adding Lindnerhof‘s LT522 Panel, the transforms into an ammunition pouch capable of also carrying four 40mm grenades or flashbangs. A tourniquet can be fixed to the bottom of the pouch. Add unit patches to the front as desired.
Zip or pull it – for quick access
These new multi-purpose pouches come with slim reversed two-way zippers and a pair of pullers. This feature enables you to open the pouch in either direction by zipper. If you need to open the pouch faster, just pull the small drawstring found in the top-middle Because the zippers are reversed, less dirt will find its way into the pouches.
Features:
Multi-Purpose Pouch for plate carriers
MX material
Lightweight and strong
Built for reliability
Velcro® outer surface for patches
Modular attachment
"Velcroable" into various plate carriers & micro rigs
Modular internal organisation Velcro® area in front and back for attaching panels (not included), for sorting e.g.
Fast opening
Top-centre drawstring for rapid zipping
Slim reversed zippers
Lets less dirt get inside - Tourniquet attachment at bottom
Colour options:
Black
Coyote
Stone Grey
5fb Flecktarn
MultiCam®
Lindnerhof Earpro Pouch PA623
€27.95*
EarPro Pouch PA623
Store your hearing-protection gear—and more
The new EarPro Pouch PA623 is a circular multipurpose pouch, ideal for storing small parts such as compact hearing protection, batteries, and other comparably sized items. Even a standard snus can fits perfectly in the bag—almost as if the bag were made for it.
The pouch is attachable anywhere with classic MOLLE/PALS fixation. Its slim, reversed two-way zippers and pair of pullers make for fast, easy opening.
Features:
Multipurpose pouch
Reliable construction
MOLLE/PALS rear modular attachment
Dirt infiltration-minimising design
Colour options:
5fb Flecktarn
3fb Flecktarn
Stone Grey
Coyote
Black
MultiCam®
Lindnerhof Flashlight Pouch PA248
€19.95*
Flashlight Pouch PA248
The PA248 flashlight pouch is a compact modular pouch designed specifically for the safe storage of small flashlights and similar items.
Securely stored and always at hand
To protect against loss, the PA248 has a reinforced flap that allows quick access to the contents of the pouch, even when wearing gloves.
In addition, the LT248 features an elastic band to ensure a secure hold without any movement, even in dynamic scenarios.
There is a drain port at the bottom of the pouch to allow water and dirt to drain away, preventing waterlogging inside the pouch.
PALS strap or belt attachment
On the back, the PA248 features slim 20mm PALS straps that can be attached to all common MOLLE/PALS systems. These slim straps not only make it easier to mount on reinforced systems like our Curv®; belts but also reduce the weight of the pouch. Alternatively, you can pass a trouser or waist belt through the belt loops on the back and additionally secure the pouch to the belt using the sewn-on hook spot.
PRODUCT DETAILS:
Compact modular pouch for small flashlights or similar
Made of durable Cordura®
Attachment with slim 20mm PALS straps or by guiding through the belt
Contents secured by reinforced flap and elastic band
Port at the bottom to prevent waterlogging
Size: 100mm x 40mm x 35mm
Weight: 26g
COLORS:
Stonegrey
Coyote
Black
Multicam®
5fb Flecktarn
3fb Flecktarn
PACKAGE INCLUDES:
1 Flashlight Pouch PA248
Lindnerhof Multi-Pouch Small Horizontal PA566
€39.95*
Multi-Pouch Small Horizontal PA566
The Multi-Pouch Small Horizontal PA566 is a compact, versatile pouch for a wide range of equipment. It offers practical attachment and organisation options and can be attached to belts up to 50mm wide.
Additional equipment storage and organisation
The PA566 multi-pouch is perfect for stowing a wide range of equipment. The elastic bands on the inside help you to organise the contents of the pouch. Additional panels (e.g. MX374, MX375, LT522) can be attached to the loop surface for further organisation. This allows you to customize your PA566 to suit your needs.
There is a drain port at the bottom of the pouch to allow water and dirt to drain away, preventing waterlogging inside the pouch.
PALS strap or belt attachment
On the back, the PA566 features slim 20mm PALS straps that can be attached to all common MOLLE/PALS systems. These slim straps not only make it easier to mount on reinforced systems like our Curv®; belts, but also reduce the weight of the pouch. Alternatively, you can pass a trouser or waist belt through the belt loops on the back and additionally secure the pouch to the belt using the sewn-on hook spot.
Product Details:
Compact modular pouch for small flashlights or similar
Made of durable Cordura®
Attachment with slim 20mm PALS straps or by guiding through the belt
Elastic band on the inside for organisation
Loop area on the insides to add panels for organisation
Port at the bottom to prevent waterlogging
Size: 105mm x 120mm x 60 mm
Weight: 80g
Colors:
Stonegrey
Coyote
Black
Multicam®
5fb Flecktarn
3fb Flecktarn
Package Includes:
1 Multi-Pouch Small Horizontal PA566
New
Lindnerhof Multi-Pouch Small M830
€19.95*
Multi-Pouch Small M830
The new Mulit-Pouch Small M830 by
Lindnerhof can be easily attached inside various pouches using the
hook-and-loop surface on the back, allowing for additional internal
organization. Functional design details ensure quick access and expanded
storage enabled by the loop panel inside.
Keep your Gear in place
The Lindnerhof Multi-Pouch Small M830 is
ideal for your medic supplies, camera equipment and much more.
The loop surface on the inside ensures flexible organization – making it easy
to store your gear in a clear and secure way, for example by using our
organization panels.
Instant access to your gear
The side handle allows you to remove the pouch
quickly and work directly from it or pass it on. The complete Velcro fleece
interior ensures an organized workspace. The all-around zipper allows for quick
and complete opening, giving you immediate access to its contents.
Product Details:
Made of durable Cordura®
Side handle for quick access
Attachment via hook-and-loop surface on the back (e.g. in Back
Pouch M800/M810)
Loop area on the inside to add panels for organization
Featuring all-around zipper for complete opening
Mesh lid for easier content identification
Loop surface on the front for color marking, patches etc.
Dimension: 12cm x 17cm x 3,5cm
Weight: 70g
Colors:
Coyote
Black
Stonegrey
Images of each camouflage pattern &
color in direct comparison can be found in our color matrix at https://www.hqg.de/en/Service/Colour-Matrix/
Package Includes:
·
1 Multi-Pouch
Small M830
New
Lindnerhof Multi-Pouch large M831
€29.95*
Multi-Pouch large M831
Designed for flexible use, the Lindnerhof
Multi-Pouch large M831 features a hook-and-loop back panel that allows secure
placement inside larger pouches – for structured internal layout, such as in
your Back Pouch. Its functional design allows for quick access, while the
internal loop surface provides additional space for modular gear organization.
Keep your Gear in place
The Lindnerhof Multi-Pouch large M831 is
perfect for your medic supplies, camera gear and much more.
The M831 has a loop surface inside for attaching panels, which enables the
structured, modular organization of a wide variety of equipment elements.
Instant access to your gear
The side handle allows you to remove the pouch
quickly and work directly from it or pass it on. The complete Velcro fleece
interior ensures an organized workspace. The all-around zipper allows for quick
and complete opening, giving you immediate access to its contents.
Product Details:
Made of durable Cordura
Side handle for quick access
Attachment via hook-and-loop surface on the back (e.g. in Back
Pouch M800/M810)
Loop area on the inside to add panels for organization
Featuring all-around zipper for complete opening
Mesh lid for easier content identification
Loop surface on the front for color marking, patches etc.
Dimension: 14cm x 26cm x 7cm
Weight: 105g
Colors:
Coyote
Black
Stonegrey
Images of each camouflage pattern &
color in direct comparison can be found in our color matrix at https://www.hqg.de/en/Service/Colour-Matrix/
Package includes:
·
1 Multi-Pouch large M831
