Plate Carrier

LT025- V A2 The Workhorse EVOLVED The LT025/V is a releasable plate carrier we introduced in 2014. Now considered a genuine classic, this mission-reliable plate carrier is fully made of 500-denier CORDURA® fabric and continues to offer standout popular features including pull-cable full-release dismount capability, separate soft- and hard-armour pockets, releasable front flap, and a chest-rig extension option. If you already have an LT025/V and want to keep it as your mission gear-buddy but still are keen to try something new, then the LT025/ V- A2 could be just the item you’re looking for! If our recently debuted LT025/V A1 represents a rebirth of the classic LT025/V plate carrier but with a focus on improved manufacturing processes, then the new LT025/V A2 stands as a workhorse evolution with its skeletonised waistbelt made from classic webbing. This weight-saving belt makes it possibile to mount Lindnerhof pouches along both its outer AND inner faces—pouches you choose from the ENTIRE Lindnerhof range! Carry more by zip-on As you might have noticed by examining other Lindnerhof plate-carrier models, we make a practice of offering the option to add zip panels at the rear of the carrier. Two zippers on the pack section let you rapidly and easily yet super-quietly attach Lindnerhof modular zip panels. The zippers are also compatible with systems made by Crye and others widely used. All about comfort & modularity The A2 version gives you more control over comfort by letting you choose where to put the padding—front, back, or both (previously, you could add padding to only the back) 2 release options A key feature of the LT025/V that we kept as part of the new A1 version and is found as well in the A2 is the cable-pull release. This gives you two dismount/release options: Option 1—pull the cable on the shoulder strap for a full drop (you pick which side you want as your drop set-up) Option 2—pull the cable at the bottom rear for a waistbelt-only drop (use this option if you need to immediately perform casualty care or conduct a checkup but want to avoid exposing yourself to greater risk that comes with having to take off your plates and attached equipment) PRODUCT DETAILS Two-part release system Removable back & front padding Skeletonised waistbelt Zip-panel compatible Separate soft- & hard-armour pockets Releasable front flap Chest-rig extension Material: 500-denier CORDURA® Weight: 1.1 kg PACKAGE INCLUDES 1 front piece 1 rear piece 1 skeletonised waistbelt 1 Drop-of Set LT025/5-ZUB 1 instruction manual

LT025/V A1—The Workhorse REBORN The LT025/V is a releasable plate carrier we introduced in 2014. Now considered a genuine classic, this mission-reliable plate carrier has been updated for even better performance in the field. Like the original, this new version is made of 500-denier CORDURA® fabric and continues to offer standout popular features including pull-cable full-release dismount capability, separate soft- and hard-armour pockets, releasable front flap, and an option for side-inserted soft ballistics. We made sure to preserve those classic features in the new A1 version because users of the previous-generation LT025/V have over the course of this past decade proven that the existing set-up was a good one. Still, we felt that a few improvements were necessary to make this impressive gear work better for you on missions. But if you are also curious to try out something new don’t worry—the new A1 version easily converts to the new A2 configuration just by getting Upgrade Kit Plate Carrier Set LT025/V-A2-ZUB (sold separately) and swapping the A1’s supplied waistbelt for the Upgrade Kit’s skeletonised waistbelt and the back part for the A2 back part with zip options. It's the details that matter The Plate Carrier Releasable LT025/V A1 meets Lindnerhof’s newly enhanced processing standards covering all aspects of product design, manufacture, and processing. Those standards, by the way, were shaped to a significant extent by the continual feedback we received over the years from users—as a result, for example, we were able to identify an issue involving rapid wearing out of the waistbelt elastic band; the new standards compelled us to abandon that previous type of elastic and utilise in its place one that is longer-lasting. All about comfort & modularity The A1 version gives you more control over comfort by letting you choose where to put the padding—front, back, or both (previously, you could add padding to only the back)! 2 release options A key feature of the LT025/V that we kept as part of the new A1 version is the cable-pull release. This gives you two dismount/release options: Option 1—pull the cable on the shoulder strap for a full drop (you pick which side you want as your drop set-up) Option 2—pull the cable at the bottom rear for a waistbelt-only drop (use this option if you need to immediately perform casualty care or conduct a checkup but want to avoid exposing yourself to greater risk that comes with having to take off your plates and attached equipment) PRODUCT DETAILS Two-part release system Removable back & front padding Separate soft- & hard-armour pockets Releasable front flap Chest-rig extension Material: 500-denier CORDURA® PACKAGE INCLUDES 1 front piece 1 rear piece 1 waistbelt 1 Drop-off Set LT025/5-ZUB 1 instruction manual

LT042/2 Plate Carrier The LT042/2 Plate Carrier is a modern multifunctional plate carrier constructed of CORDURA® Advanced Fabric plus webbing—a proven combination of materials.  A reliable partner for carrying your plates and gear The LT042/2 Plate Carrier is a second-generation version of model LT042. Like its predecessor, the LT042/2 is based on a well-conceived design and is made with a smart mix of proven materials that now include our new multiaxial laminate MX in the shoulder and waist straps, the webbing in the front and back of the carrier has been slimmed down from 25mm to 20mm to permit less weight zero loss of stability. And as with the LT042, all MOLLE/PALS-compatible pouches can be attached.  Light or heavy loadout, LT042/2 supports your decision Zippers on the LT042/2’s back panel let you rapidly, easily, and silently attach Lindnerhof modular zip panels—even attach a Lindnerhof backpack if you’d like. The zippers are compatible with the most widely used systems from other manufacturers (such as Crye). And a large Velcro® fastener pad at the front of the carrier allows modular panels and chest rigs to be stably attached. Meanwhile, Velcro® fasteners inside the carrier let you add extra pockets and pads, including Lindnerhof‘s inner padding (kite shape or LT250), Velcro® side pockets (HL175, MX634), and Velcro® bottom pockets (MX174, LT104).  Put it all together and the LT042/2 adds up to a smart solution for stowing equipment whether you choose to go light or need a heavier loadout, want to carry breacher tools, or bring along more extras to support your mission.  Cable management—concealed and individual Three back-to-back cable attachments are included on the LT042/2‘s front panel. Use these to attach cables or a hydration tube. Longer cables can also be installed directly through the plate compartment via three user-cuttable seams at the sides and top of the plate compartment (for example, cutting one of the seams at its midpoint would permit concealment of the radio cable running from a waist-mounted transceiver up to its headset).  On-and-off in the blink of an eye Our patented hook buckle is a classic quick-release system, but it’s also designed to close fast, easy, silently, and in multiple directions, as needed. The LT042/2 comes with our extra-slim 25mm shoulder-strap hook buckles. Their size minimizes potential inteference with your weapon system—but are as secure and steady as conventional hook buckles.  Multiple sizes of plates fit one compartment The LT042 plate compartment is sized for a SAPI L plate. But thanks to its integrated plate-holding strap, you can also affix smaller plates (SAPI M or NATO standard 25x30cm).  Features: Fully modular plate carrier Standard MOLLE/PALS webbing, full front and back Shoulder straps and skeletonized, double 3-row waist belt made from multiaxial laminate MX material Cable-management loops Patch areas MOLLE slots on shoulder straps (for cable management and tourniquets; Velcro® connection-enabled length adjustments) Extra-slim 25mm patented hook buckle on shoulder straps  Loops on shoulder straps compatible with Lindnerhof-Taktik backpacks (HL334 Modular Backpack System 10L) Zippered panels (Crye-compatible) 20-row waist belt (fixation by elastic cord on the back) Shoulder straps size M Plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap) Cut-open seams for cable routing Add-on extras: LT250 Inner Pads, HL175 Velcro® Side Pocket, HL105 Shoulder Pads, HL334 Backpack, LT632 Zip Panel Color options: Black Stone gray Coyote 5fb Flecktarn MultiCam® Size options: L Package includes: 1 Front piece 1 Back piece 1 Pair of shoulder straps (size M) 1 Waistbelt (3 rows) 1 Elastic cord (3mm) 1 Elastic cord (5mm) 2 Cord stoppers

Plate Carrier MX042 The MX042 plate carrier is the MX version of the well-known LT042/II plate carrier. It is fully MOLLE/PALS compatible thanks to laser cuts on the front and back. The multiaxial laminate not only ensures a lower weight, but also less water absorption compared to plate carriers with webbing. Quick Release and Attachment It is equipped with our patented hook buckle on the shoulder and waist straps. This allows for the quick release of the plate carrier within seconds, whether due to an injury, a fall into water, or a change in the threat or operational situation. A strong pull in any direction is all it takes. Just as quickly as it can be removed, it can be reattached. Integrated Admin Compartment The plate carrier features an integrated admin pocket beneath the fleece surface at the front. This pocket is equipped with elastic loops for organizing and attaching smaller equipment items. Compatible with various plate sizes The MX042 plate carrier comes in sizes M and L, each designed to accommodate SAPI M or L plate sizes. The plates can be inserted from the bottom and are held securely by the plate retaining strap. This strap also ensures smaller or uniquely shaped plates (like the Swimmers Cut) stay in the correct position. Additional hook and loop pockets (such as MX174, LT112, LT104) can be attached to the plate compartment's hook and loop fastener. An extra strap is included to simplify opening the plate compartment. Simple Adjustment of the Waist Belt The skeletonised waist belt can be adjusted individually due to a lacing system and a cord stopper, even while fastened. Two distinct cord thicknesses are included in the package. These provide different levels of resistance and flexibility, facilitating adaptation to various wearing needs and changes in clothing underneath the plate carrier, such as a jacket versus a field shirt. Slim Shoulder Strap The shoulder strap of the plate carrier can be adjusted using the hook and loop fastener, allowing adjustments even while being worn. The slim 25 mm hook buckle on the shoulder straps provides extra space for placing a rifle stock. MOLLE/PALS slots are also available on the shoulder strap for cable management or for attaching additional pouches. Loop areas on both the inside and the outside The upper sections on the front and back of the carrier have loop areas for attaching patches. This allows for personalisation and labelling. Additionally, the loop surfaces on the inside of the plate carrier can be used to attach padding (e.g. LT250) or extra pockets (e.g. MX634 radio bag or LT241 tourniquet holder). Quick to set up and convert Our MX042 panel carrier can be quickly and flexibly adapted to respond to different situations and tasks. It features a large loop surface on the front for attaching front panels (MX231 & MX234), using either a plug-in buckle or hook and loop. Alternatively, chest rigs (e.g. MX266) or micro rigs (MX886/MX887) can also be attached here. The plate carrier is also compatible with LHT backpacks thanks to loops on the waist and shoulder straps. Zip panels (LT632 and the LT400/II) can be easily and quickly attached to the zips on the back. Intelligent Cable Management The MX042 plate carrier offers an intelligent cable management system. It enables the organised sorting and routing of cables and drinking tubes. Cables can be also routed through the plate compartments thanks to the bartack seams at the front and back. This prevents the cables from protruding and avoids damage or obstructions, such as when changing magazines. The front section includes back-to-back loops for further optimization of cable routing. PRODUCT DETAILS: Fully modular plate carrier Made from ultra-light multiaxial laminate MX Standard laser-cut MOLLE slots on the entire front and back 3 back-to-back loops for cable management on the front Cut-open bartack seams for cable routing Zipper on the back for attaching zip-panels (CP-compatible) hook and loop areas on the front and back hook and loop areas on the insides to add pads or additional pouches Shoulder straps in size M with extra-slim 25mm patented hook buckle MOLLE slots on shoulder straps (for cable management and additional pouches; length adjustments via hook and loop fastener) Loops on shoulder straps and waistbelt compatible with Lindnerhof Taktik backpacks (e.g. HL334 Modular Backpack) Skeletonised waistbelt: 3 rows with 10 MOLLE slots each Waistbelt with patented hook buckle Size adjustment through shock cord Compatible with plate size SAPI L (and SAPI M or NATO-standard by using the plate-holding strap) Attachment of a chest rig (e.g. MX266 + RMPL144) possible MATERIALS: Multiaxial laminate MX WEIGHT: approx. 700g COLORS: Black Stonegrey Coyote 5fb Flecktarn MultiCam® SIZES: M L PACKAGE INCLUDES: 1 Front piece 1 Back piece 1 Pair of shoulder straps (size M) 1 waistbelt (3 rows with 10 MOLLE slots each) 1 Elastic cord (3mm) 1 Elastic cord (5mm) 1 Cord stopper

Ultralight Plate Carrier MX244 Weighing just 450 grams, this ultralight carrier serves as a grid to carry SAPI L-sized plates. Additional plate sleeves protect and fully camouflage the plates. The lightest way to carry your plates The MX244 Ultralight Plate Carrier is built as a grid for carrying your plates but with the addition of only minimal extra weight. To further reduce weight, the carriers are made of the newly introduced multiaxial laminate in combination with our patented and proven hook buckle (there’s one of these extra-slim 25mm hook buckles for each shoulder strap as well as for a two-row-only waist belt. On and off in the blink of an eye Our patented hook buckle is a classic quick-release system, but it’s also designed to close fast, silently, easily, and in multiple directions as needed.  The MX244 comes with our extra-slim 25mm hook buckle on the shoulder straps and waist belt. These hook buckles are so slim that they stay more out of the way of your weapon system and give you more space along your waist belt—all while staying as secure and steady as ordinary hook buckles. The set-up: make it yours Besides the hook buckle, the MX244 also includes standard adaptation loops on the shoulder straps and waist belt to permit attachment of Lindnerhof Taktik backpacks. Four Velcro® loops on the front and back of the carrier let you manage your cables with ease. The MX244 also includes a pair of plate sleeves made of Schoeller®-dynamic stretch fabric. These sleeves cover your hard armor so they can be fully camouflaged in addition to offering extra protection for the plates. Features: Fully modular plate carrier Standard MOLLE slots on entire front and back Made from multiaxial laminate MX 8 loops for cable management Patch areas MOLLE slots on shoulder straps (for cable management and tourniquets; Velcro® connection-enabled length adjustments) Extra-slim 25mm patented hook buckle on shoulder straps and waist belt Loops on shoulder straps compatible with Lindnerhof Taktik backpacks (HL334 Modular Backpack System 10l) Waist belt size-adjustment (by means of cords and fixation in MOLLE slots on the back) 20-rows waist belt (fixation by elastic cord on the back) Shoulder straps size M Plate size SAPI L-only Includes plate sleeve made of Schoeller®-dynamic (sleeves come with Velcro® stripes to adapt Lindnerhof Taktik pads in addition to extra pouches Add-on extras: MX233 Velcro Panel, MX106 Single Point Velcro Sling, HL105 Shoulder Pads Weighs 450g without Plate Sleeve Color options Coyote Stone gray Black 5fb Flecktarn MultiCam What comes in the package: 1 Front piece 1 Back piece 1 pair of shoulder straps (size M) 1 Waistbelt (2 rows) 1 Elastic cord (3mm) 1 Elastic cord (5mm) 3 Cord stoppers 2 Plate sleeves (made of Schoeller®-dynamic )