Medic Pouch Large PA012
€89.95*
Sanitätstasche PA012
Taktische Sanitätstasche mit herausnehmbarem Innenleben.
Die PA012 von Lindnerhof-Taktik ermöglicht den schnellen, benutzerfreundlichen Zugriff auf die Erste-Hilfe Ausstattung. Dieser wird durch die herausziehbare Innentasche ermöglicht.
20mm Molle Reihen
Der Grundkörper der Sanitätstasche verbleibt dabei an der Ausrüstung, während der Innenteil einfach mit einem Handgriff herausgezogen wird. Durch das praktische Inlay kann der gesammte Inhalt der Tasche direkt vor einem ausgebreitet werden.
Dadurch hat man einen schneller Zugriff auf das komplette Material.
Einfache Befestigung
Durch die angebrachten PALS-Gurte kann die PA012 einfach an jedem Molle-kompatiblen System angebracht werden.
Produktdetails:
Herausziehbare, auffaltbare Innentasche
Schneller Zugriff
PALS/MOLLE Befestigung
Hergestellt nach TL der Bundeswehr
Farben:
Schwarz
Steingrau
Coyote
5fb Flecktarn
3fb Flecktarn
MultiCam®
Lieferumfang:
Sanitätstasche PA012
Medic Pouch Small PA127
€69.95*
This pouch consists of one body with a zip fastener extending around the circumference, protected by a lid with a sewn-on Velcro strip for attaching patches.Quick accessA red tab protruding in the middle to the lid provides fast access to the removable inside fittings. There is a small opening under a rubber band that gives access to a small inside pocket. Medical gloves can be mounted for easy access.Customized panelThe removable panel consists of a wide, reinforced Cordura strip with elastic loops for securing dressing material and medical instruments. This pouch is not a standard IFAK pouch for storing a tourniquet.PALS attachment systemThe PALS attachment system of the reverse side of the product is for adapting to a modular system on the basis of a 25mm strap. This connection is an easier alternative to mounting with the MALICE clip while maintaining the same firm hold on the carrier.Product Details Fleece pad for patches Zip fastener extending around the circumference Removable inside fittings Easy-grip red tab Expandable rubber bands on panel PALS attachment system Integrated water drainage Manufactured in accordance with TL technical standards of the German Bundeswehr Dimensions (H/W/D): 110/100/50mm Weight: 140g
Tourniquet Holder HL506
€7.95*
Halterung Tourniquet HL506
Die Halterung Tourniquet bemöglicht das stabile und schnell zugriffsbereite Befestigen eines Tourniquets (z.B. CAT).
Dieses wird an zwei Punkten mit Gummiwebband gesichert. Die Halterung kann einfach in dafür vorhandene Aufnahmen (z.B. an der Sanitätstasche HL300) oder auch an MOLLE/PALS befestigt werden.
Somit kann ein Tourniquet auch bequem am Tragesystem (z.B. Plattenträger) oder auch an Modulartaschen mit zusätzlichen Aufnahmen befestigt werden.
Produktdetails:
Befestigungsplattform für CAT Tourniquet (o.ä.)
2-Punkte Befestigung durch Gummiwebbänder
MOLLE/PALS-kompatibel
Passend für Sanitätstaschen HL300 & PA012
Hergestellt nach TL der Bundeswehr
Lieferumfang:
Halterung Tourniquet HL506
Lindnerhof Sanitätstasche MX301
€74.95*
Sanitätstasche MX301
Die MX301 Sanitätstasche ist eine horizontal montierbare IFAK-Tasche für den schnellem Zugriff.
Just pull it
Die kompakte, einfach zu bedienende IV-Kit-Tasche unterstützt Dich für schnelle medizinische Hilfe in kritischen Situationen. Die MX301, die aus dem neuen Multiaxial-Laminat besteht, ist als Außenhülle konzipiert, die ein Inlay enthält, das mit Klettverschluss mit der Außenhülle verbunden ist. Auf jeder Seite des Inlays sind Schlaufen angebracht - ziehe sie mit der rechten oder linken Hand und du kannst das Inlay mit deiner medizinischen Ausrüstung schnell lösen.
I-ndividual F-irst A-id K-it - individuelle Konfiguration
Die neue IFAK Pouch MX301 ist so konzipiert, dass sie durch große flache Einschubfächer sowie elastische Schlaufen eine individuelle Konfiguration bietet, um das Inlay völlig frei wählbar zu unterteilen und medizinische Gegenstände wie Kompressen, Rettungsdecke, Chest Seals, usw. zu verstauen. Das Cover kommt mit elastischen Bändern an der Ober- und Unterseite, um das Inlay zu komprimieren und zu sichern, zudem können Tourniquets und CAT's hierüber fixiert werden. Die Patchfläche auf der Vorderseite kann zur einfachen Kennzeichnung verwendet werden.
Um die MX301 Sanitätstasche an deiner Ausrüstung zu befestigen, kannst du sie klassisch mit MOLLE/PALS befestigen, aber die Tasche kann auch mit separaten 5 cm breiten Schlaufen auf der Rückseite an einem Gürtel eingeschlauft werden. Trage und konfiguriere die MX301, wie du willst.
Produktdetails:
Leichter horizontaler IFAK-Beutel
Hergestellt aus multiaxialem Laminat
MOLLE/PALS-kompatibel
Gürtelschlaufen (50 mm) zusätzlich zu den PALS-Gurten erhältlich
Je drei elastische Bänder oben und unten zum Komprimieren und Sichern des Inhalts
Kompatibel mit dem HL506 Tourniquet-Halter (nicht im Lieferumfang enthalten)
Kann mit 2x HL506 bis zu zwei CAT (oder ähnliche Modelle) außen befestigen
Klettfläche an der Außenseite für Patches
Die Einlage kann auf beiden Seiten mit einer Hand herausgezogen werden
Zwei Schlaufen pro Seite für einfaches Herausziehen
Inlay wird zusätzlich durch Klettpunkte innen gehalten
Freie Unterteilung im Inlay
Großes, flaches Einschubfach für größere, flache Gegenstände (Kompressen, Rettungsdecke, Chest Seal, etc.)
Farben:
Schwarz
Steingrau
Cojote
5fb Flecktarn
MultiCam®
Lieferumfang:
Sanitätstasche MX301
Tourniquet Adapter LT241
€7.95*
Tourniquet Adapter LT241
The LT241 Tourniquet Adapter ensures your tourniquet (e.g., CAT Gen. 7) is securely carried and immediately accessible, enhancing your readiness for any critical situation.
Safe storage and accessibility
Designed with a durable elastic band, the LT241 securely holds your tourniquet in place, no matter the movement. Its placement under the hip belt of plate carriers such as the LT042/II and MX042 ensures quick access without hindering mobility, making it an essential tool for high-pressure scenarios.
Attachment via hook and loop
The adapter is effortlessly fastened to your carrying system with a reliable hook and loop fastening. Its adaptable design allows it to fit various setups and mission-specific configurations seamlessly.
With the LT241, you’ll have your life-saving equipment close at hand, offering peace of mind and enhanced safety in the field.
Produktdetails:
Adapter for securing a tourniquet (e.g., CAT Gen. 7)
Attachment beneath the waist belt with hook and loop fastener
Compatible with LT042/II, MX042, and LT025/V A1 & A2 plate carriers
Elastic loop to protect against loss
Quick and easy access to your tourniquet
Size: 25mm x 125mm
Weight: 15g
Colors:
Black
Coyote
Stonegrey
Includes:
1 Tourniquet Adapter LT241
Lindnerhof Tourniquet Pouch MX128
€27.95*
Tourniquet Pouch MX128
The Tourniquet Pouch MX128 ensures your tourniquet (e.g., CAT Gen. 7) is securely stored and immediately accessible in any critical situation.
Safe storage and accessibility
The flap of the MX128 has a hook and loop fastener as well as a pushbutton to protect your tourniquet from loss. However, the MX128 still offers instant access to your tourniquet - even with just one hand.
Designed with a durable elastic band on the inside, the MX128 securely holds your tourniquet in place, no matter the movement.
This means that your life-saving accessories are always protected, but still within easy reach - for added safety in the field.
Attachment via PALS straps
On the back, the MX128 features slim 20mm PALS straps that can be attached to all common MOLLE/PALS systems.
PRODUCT DETAILS:
Closed pouch for storage of a tourniquet (e.g., CAT Gen. 7)
Made of durable, lightweight MX
Attachment with slim 20mm PALS straps or by guiding through the belt
Fastening with hook and loop fastener and a pushbutton
Elastic loop for added rotection against loss
Quick and easy access to your tourniquet – even with one hand
Size: 160mm x 50mm x 40mm
Weight: 41g
COLORS:
Stonegrey
Coyote
Black
Multicam®
5fb Flecktarn
PACKAGE INCLUDES:
1 Tourniquet Pouch MX128
New
Medic Pouch horizontal PA300 coyote
€59.95*
Medic Pouch horizontal PA300
The PA300 is a narrower version of the
MX301 without interior compartments, making it ideal for compact transport of
your medical gear.
Easy to pull out
The PA300 consists of a protective outer
shell with a removable inlay that is fastened securely with hook-and-loop. With the attached straps, you can
quickly pull out the inlay with one hand and immediately access your medical
equipment
Maximum freedom in organization
The PA300 offers complete freedom in
organizing your equipment. Internal dividers have been purposely left out so
that you can completely customize the inlay – perfect for the use of
vacuum-packed contents.
Elastic bands on the top and bottom allow
you to securely compress the contents or attach additional equipment, such as
tourniquets or CATs. A patch area on the front provides space for labels or
markings.
For maximum flexibility, you can attach the
PA300 medical pouch to your equipment via MOLLE/PALS.
Product Details:
Lighteweight, horizontal medic pouch
A slimmer version of the MX301
Three elastic straps at the top and bottom for compression and
securing a tourniquet (tourniquet holder HL506 sold separately)
Loop surface on the outside for patches or markings
The inlay can be pulled out on both sides using the loops
Inlay is held in place by hook-and-loop points on the inside
No dividers – the contents can be used as a vacuum-packed unit
Attachment via MOLLE/PALS
Dimensions:
18,5x4,5x10,5 cm
Weight: 92g
Colors:
Coyote
Stonegrey
Multicam®
5fb Flecktarn
Black
Images of each camouflage pattern &
color in direct comparison can be found in our color matrix at https://www.hqg.de/en/Service/Colour-Matrix/
Package includes:
·
1 Medic Pouch horizontal PA300
Available, ready for shipment in 1-3 days
New
Medic Pouch horizontal PA300 stonegrey
€59.95*
Medic Pouch horizontal PA300
The PA300 is a narrower version of the
MX301 without interior compartments, making it ideal for compact transport of
your medical gear.
Easy to pull out
The PA300 consists of a protective outer
shell with a removable inlay that is fastened securely with hook-and-loop. With the attached straps, you can
quickly pull out the inlay with one hand and immediately access your medical
equipment
Maximum freedom in organization
The PA300 offers complete freedom in
organizing your equipment. Internal dividers have been purposely left out so
that you can completely customize the inlay – perfect for the use of
vacuum-packed contents.
Elastic bands on the top and bottom allow
you to securely compress the contents or attach additional equipment, such as
tourniquets or CATs. A patch area on the front provides space for labels or
markings.
For maximum flexibility, you can attach the
PA300 medical pouch to your equipment via MOLLE/PALS.
Product Details:
Lighteweight, horizontal medic pouch
A slimmer version of the MX301
Three elastic straps at the top and bottom for compression and
securing a tourniquet (tourniquet holder HL506 sold separately)
Loop surface on the outside for patches or markings
The inlay can be pulled out on both sides using the loops
Inlay is held in place by hook-and-loop points on the inside
No dividers – the contents can be used as a vacuum-packed unit
Attachment via MOLLE/PALS
Dimensions:
18,5x4,5x10,5 cm
Weight: 92g
Colors:
Coyote
Stonegrey
Multicam®
5fb Flecktarn
Black
Images of each camouflage pattern &
color in direct comparison can be found in our color matrix at https://www.hqg.de/en/Service/Colour-Matrix/
Package includes:
·
1 Medic Pouch horizontal PA300
Available, ready for shipment in 1-3 days
New
Medic Pouch horizontal PA300 multicam
€59.95*
Medic Pouch horizontal PA300
The PA300 is a narrower version of the
MX301 without interior compartments, making it ideal for compact transport of
your medical gear.
Easy to pull out
The PA300 consists of a protective outer
shell with a removable inlay that is fastened securely with hook-and-loop. With the attached straps, you can
quickly pull out the inlay with one hand and immediately access your medical
equipment
Maximum freedom in organization
The PA300 offers complete freedom in
organizing your equipment. Internal dividers have been purposely left out so
that you can completely customize the inlay – perfect for the use of
vacuum-packed contents.
Elastic bands on the top and bottom allow
you to securely compress the contents or attach additional equipment, such as
tourniquets or CATs. A patch area on the front provides space for labels or
markings.
For maximum flexibility, you can attach the
PA300 medical pouch to your equipment via MOLLE/PALS.
Product Details:
Lighteweight, horizontal medic pouch
A slimmer version of the MX301
Three elastic straps at the top and bottom for compression and
securing a tourniquet (tourniquet holder HL506 sold separately)
Loop surface on the outside for patches or markings
The inlay can be pulled out on both sides using the loops
Inlay is held in place by hook-and-loop points on the inside
No dividers – the contents can be used as a vacuum-packed unit
Attachment via MOLLE/PALS
Dimensions:
18,5x4,5x10,5 cm
Weight: 92g
Colors:
Coyote
Stonegrey
Multicam®
5fb Flecktarn
Black
Images of each camouflage pattern &
color in direct comparison can be found in our color matrix at https://www.hqg.de/en/Service/Colour-Matrix/
Package includes:
·
1 Medic Pouch horizontal PA300
Available, ready for shipment in 1-3 days
New
Medic Pouch horizontal PA300 5-color flecktarn
€59.95*
Medic Pouch horizontal PA300
The PA300 is a narrower version of the
MX301 without interior compartments, making it ideal for compact transport of
your medical gear.
Easy to pull out
The PA300 consists of a protective outer
shell with a removable inlay that is fastened securely with hook-and-loop. With the attached straps, you can
quickly pull out the inlay with one hand and immediately access your medical
equipment
Maximum freedom in organization
The PA300 offers complete freedom in
organizing your equipment. Internal dividers have been purposely left out so
that you can completely customize the inlay – perfect for the use of
vacuum-packed contents.
Elastic bands on the top and bottom allow
you to securely compress the contents or attach additional equipment, such as
tourniquets or CATs. A patch area on the front provides space for labels or
markings.
For maximum flexibility, you can attach the
PA300 medical pouch to your equipment via MOLLE/PALS.
Product Details:
Lighteweight, horizontal medic pouch
A slimmer version of the MX301
Three elastic straps at the top and bottom for compression and
securing a tourniquet (tourniquet holder HL506 sold separately)
Loop surface on the outside for patches or markings
The inlay can be pulled out on both sides using the loops
Inlay is held in place by hook-and-loop points on the inside
No dividers – the contents can be used as a vacuum-packed unit
Attachment via MOLLE/PALS
Dimensions:
18,5x4,5x10,5 cm
Weight: 92g
Colors:
Coyote
Stonegrey
Multicam®
5fb Flecktarn
Black
Images of each camouflage pattern &
color in direct comparison can be found in our color matrix at https://www.hqg.de/en/Service/Colour-Matrix/
Package includes:
·
1 Medic Pouch horizontal PA300
Available, ready for shipment in 1-3 days
New
Medic Pouch horizontal PA300 black
€59.95*
Medic Pouch horizontal PA300
The PA300 is a narrower version of the
MX301 without interior compartments, making it ideal for compact transport of
your medical gear.
Easy to pull out
The PA300 consists of a protective outer
shell with a removable inlay that is fastened securely with hook-and-loop. With the attached straps, you can
quickly pull out the inlay with one hand and immediately access your medical
equipment
Maximum freedom in organization
The PA300 offers complete freedom in
organizing your equipment. Internal dividers have been purposely left out so
that you can completely customize the inlay – perfect for the use of
vacuum-packed contents.
Elastic bands on the top and bottom allow
you to securely compress the contents or attach additional equipment, such as
tourniquets or CATs. A patch area on the front provides space for labels or
markings.
For maximum flexibility, you can attach the
PA300 medical pouch to your equipment via MOLLE/PALS.
Product Details:
Lighteweight, horizontal medic pouch
A slimmer version of the MX301
Three elastic straps at the top and bottom for compression and
securing a tourniquet (tourniquet holder HL506 sold separately)
Loop surface on the outside for patches or markings
The inlay can be pulled out on both sides using the loops
Inlay is held in place by hook-and-loop points on the inside
No dividers – the contents can be used as a vacuum-packed unit
Attachment via MOLLE/PALS
Dimensions:
18,5x4,5x10,5 cm
Weight: 92g
Colors:
Coyote
Stonegrey
Multicam®
5fb Flecktarn
Black
Images of each camouflage pattern &
color in direct comparison can be found in our color matrix at https://www.hqg.de/en/Service/Colour-Matrix/
Package includes:
·
1 Medic Pouch horizontal PA300
Available, ready for shipment in 1-3 days
